Operation

• ONLY AFTER PROPER INSTALLATION IS COMPLETED SHOULD YOU PROCEED WITH LEAK TEST OPERATION.
• PROSTRAINER SHOULD BE INSTALL ON THE SUCTION SIDE OF PUMP ONLY.
• ALWAYS CHECK VALVE POSITION (OPEN OR CLOSED) BEFORE STARTING PUMP.
• NEVER START PUMP UNTIL ALL SYSTEM CIRCUIT VALVES ARE IN FULL OPEN POSITION
• NEVER OPEN OR CLOSE VALVES QUICKLY WHILE PUMP IS RUNNING OR SERIOUS DAMAGE MAY OCCUR WHICH WILL VOID WARRANTEE

1. Pool, water feature, fountain or other fluid body must be filled to proper operating level.
2. Pump must have power and be previously tested for proper rotation.
3. Open all valves to operating position
4. Turn on pump, resolve any leaking issues.
5. Periodically examine the baskets to see how full they are when pump vacuum increases by a predetermined amount (generally 3 inches of Mercury) clean baskets.
6. Always clean baskets prior to long periods of anticipated unattended maintenance.

NOTES:

It may be necessary to make adjustment to the lid draw latches after the break in period has occurred or if the gasket is disturbed during cleaning.